Anycubic PETG

Name: Anycubic PETG
Brand: Anycubic

Specifications

Nozzle temperature230–250 °C

Bed temperature70–85 °C

Print speed50–100 mm/s

Density1.27 g/cm³

Description

Anycubic PETG is a strong, practical filament for functional parts that need impact, moisture, and chemical resistance. Unlike PLA, PETG is noticeably tougher and more ductile — parts flex instead of snapping and hold their shape near heat sources. It prints with a smooth, slightly glossy surface and good see-through clarity, while a tight ±0.02 mm diameter tolerance and even winding keep feeding smooth, without clogs or bubbles.

Print Settings

Nozzle temperature: 230–250 °C
Bed temperature: 70–85 °C
Print speed: 40–60 mm/s (recommended), up to 100 mm/s
Diameter: 1.75 mm, ±0.02 mm tolerance
Heated bed required; no enclosure or hardened nozzle needed

PETG is hygroscopic: it absorbs moisture from the air and starts to spit steam, leaving stringing and blobs on the surface. Dry the spool at 60–65 °C for about 6–8 hours before printing and use reduced part cooling so layers fuse well and stay clean.

Anycubic PETG is a versatile pick for functional parts: enclosures, brackets, mechanical assemblies, outdoor items, and anything that touches water or household chemicals. Clear and translucent colors are great for lampshades, vases, and see-through decor. It works with almost any 1.75 mm FDM printer — Anycubic Kobra, Creality Ender 3, Bambu Lab, and more — you just need a heated bed. Over 25 colors are available, including translucent and textured finishes.