Anycubic 14K Texture Resin — Matte 405nm Resin Specs & Colors

Name: Anycubic 14K Texture Resin — Matte 405nm Resin Specs & Colors
Brand: Anycubic

Specifications

Cure wavelength405 nm

Density1.1 g/cm³

Description

Anycubic 14K Texture Resin is a 405nm UV resin with a matte finish: prints come out with a soft, velvety matte surface instead of a glossy one. The matte look hides horizontal layer lines, kills glare and makes painting easier — primer tends to lay down more evenly and grip better. The line is tuned for high-detail '14K' printing with crisp fine features, consistent curing and good dimensional accuracy. It works with most desktop 405nm LCD/DLP printers.

Print Settings

Cure wavelength: 405nm
Normal exposure: roughly 2–3s (screen dependent)
Bottom exposure: 25–35s
Density: ~1.1 g/cm³, matte finish straight off the plate
Cleans with isopropyl alcohol (IPA), then UV post-cure

Print in a ventilated area and wear nitrile gloves — liquid resin needs careful handling. Washing and UV post-curing are mandatory after printing, otherwise the model stays tacky and won't reach full strength.

The matte finish is especially handy for miniatures, busts and figurines meant for painting, as well as board games and collectibles where you want a clean, glare-free surface. Available colors are HD Gray, Beige, Blue, Gray and White — grey tones make detail easy to photograph, while light shades take paint well. The resin runs on popular Anycubic Photon LCD printers and on ELEGOO, QIDI and other 405nm machines.

FAQ

What does the matte Texture finish do?

Prints come out with a soft, matte surface and no glare. That finish hides horizontal layer lines and makes painting easier — primer and paint go on more evenly than on a glossy part.

Which printers is Anycubic Texture Resin compatible with?

Do I need to post-cure after printing?

Does this resin smell strongly?