ELEGOO Water-Washable ABS-Like Resin
Water-Washable Resin
Water-Washable Resin vs standard resin?Where to Buy
Price may vary by seller
ELEGOO official store on AliExpressSelect a printer to check
Material passport
Cure wavelength 405 nm · wash: water · post-curing required
Specifications
Print parameters
Physical properties
Description
ELEGOO Water-Washable ABS-Like Resin combines two useful traits in one bottle: ABS-like toughness and the convenience of washing prints in plain water. It cures under 405nm UV light and works with most desktop LCD/MSLA printers that use mono screens. Finished parts take impact and load well — they're hard to crack or snap — so this resin suits functional parts, housings, tools and prototypes.
Print Settings
- Cure wavelength: 405nm
- Normal exposure: roughly 2–3s (screen dependent)
- Bottom exposure: 25–35s
- Density: ~1.1 g/cm³, low viscosity for stable printing
- Washes off with plain water — no alcohol needed, low odor
The low viscosity improves flow: the resin settles evenly in the vat, traps fewer bubbles and reproduces fine detail cleanly, which raises the success rate. The line comes in a wide palette — from Ceramic Grey and White to clear blue and green — in 1000g and 2000g bottles. It's compatible with ELEGOO Mars and Saturn, Anycubic Photon and other 405nm LCD machines.
Frequently asked questions
With plain water. It's a water-washable resin, so no IPA is needed — just rinse the print in a container of water. Don't pour the wash water down the drain: cure it first in sunlight or under a UV lamp so the leftover resin solidifies, then dispose of it as solid waste.
Compatible printers
Matched by print temperatures and printer requirements