Anycubic Water-Wash Resin — 405nm Water-Washable Resin

Name: Anycubic Water-Wash Resin — 405nm Water-Washable Resin Specs
Brand: Anycubic

Specifications

Cure wavelength405 nm

Density1.1 g/cm³

Description

Anycubic Water-Wash Resin 2.0 is a water-washable 405nm UV resin for desktop resin printers. The line's key advantage is cleanup: finished prints rinse off with plain water instead of isopropyl alcohol, which saves both time and money on consumables. The low-viscosity formula flows well, so layers cure faster and printing stays reliable. The updated recipe also reduces the risk of models cracking over time.

Print Settings

Cure wavelength: 405nm (compatible with the 365–405nm band)
Normal exposure: roughly 2–3s (screen dependent)
Bottom exposure: 25–35s
Density: ~1.1 g/cm³, low viscosity and good fluidity
Cleans with plain water, no isopropyl alcohol; low odor

Print in a ventilated area and wear nitrile gloves: water-washable does not mean skin-safe. Post-curing under UV is mandatory after the water rinse, otherwise the model stays tacky and won't reach full strength. Don't pour leftover liquid resin down the drain — fully cure it first.

The line suits miniatures, figurines, anime models, creative crafts and detailed prototypes. Eleven colors are available — from grey, white and black to translucent tones and soft pink. The resin works with most LCD/DLP printers using 405nm UV light, and results are best alongside an Anycubic Wash & Cure station.

FAQ

How do I clean prints made with Anycubic Water-Wash Resin?

With plain water — no isopropyl alcohol needed. Soak the model in clean water, rinse or ultrasonically clean it, then dry and cure. An Anycubic Wash & Cure station gives the best results.

Do I need to post-cure after printing?

Which printers is this resin compatible with?

Is water-washable resin safe to touch?