ResineSUN
eSUN Water Washable Resin
Water-Washable Resin · Standard
Colors
Select printer
Where to Buy
AliExpress
$37,86
Реклама · erid: 2SDnjcDLsQvSpecifications
Cure wavelength405 nm
Density1.1 g/cm³
Description
eSUN Water Washable Resin is a water-washable photopolymer for LCD/MSLA printers. The big convenience: you rinse finished parts with plain water, no IPA needed. That simplifies post-processing and cuts cost and odor during the work.
Print Settings
- Cure wavelength: 405 nm
- Normal layer exposure: about 2–3 s (printer-dependent)
- Bottom layer exposure: about 30–40 s
- Technologies: LCD / MSLA
- Bottle volume: 1000 ml
'Water washable' only refers to rinsing uncured resin — a cured part is unaffected by water. Don't pour the dirty rinse water down the drain: liquid resin is toxic; cure it in sunlight first so it solidifies and settles out.
Great for miniatures, figurines, prototypes and any model where you want easier washing. After printing, rinse the part in water and always post-cure under UV.
FAQ
Yes, that's the whole point of this line: uncured resin rinses off with water, no IPA. Once the part is cured, water no longer affects it.