QIDI Q1 Pro
Where to Buy
Specifications
Build Volume
Speed
Temperature
Layer Height
Construction
Physical
Information
Description
The QIDI Q1 Pro is an enclosed CoreXY printer that became one of QIDI Technology's most popular machines in 2024. Its headline feature is an actively heated chamber up to 60 °C, something you rarely find at this price. It suits experienced users and tinkerers who want to print engineering and high-temperature materials, not just PLA.
The build volume is 245x245x245 mm. It's built on an all-metal CoreXY frame with a direct drive extruder running hardened steel gears, so the Q1 Pro handles PLA, PETG, ABS, ASA, TPU, nylon, polycarbonate, and carbon fiber composites. The nozzle hits 350 °C and the bed reaches 120 °C, with travel speeds up to 600 mm/s and real-world print speeds around 300 mm/s at up to 20,000 mm/s² acceleration. Everything runs on open Klipper firmware on a 64-bit Cortex-A53 processor. You also get load-cell auto leveling, dual independent Z lead screws, a filament runout sensor, power loss recovery, and a built-in camera.
Advantages
- Active 60 °C chamber heating for the price — the whole enclosure warms up, which kills warping and layer splitting on ABS, ASA, and nylon (almost no rival offers this in this class)
- Wide material range — a 350 °C nozzle and 120 °C bed unlock engineering plastics and carbon fiber composites; reviewers printed ABS, nylon, and carbon-filled X-Line FormaX successfully
- Flat first layer — load-cell auto leveling in the bed gives a near-perfect first layer with no manual Z-offset fiddling
- Fast and clean — on its CoreXY motion a Benchy prints in about 16 minutes, and walls come out clean with no visible artifacts
- Open ecosystem — stock Klipper with a web UI, print from QIDI Studio, OrcaSlicer, Cura, or PrusaSlicer, plus rock-solid Wi-Fi and a companion mobile app
- Ready out of the box — the assembled printer with auto calibration gets to its first print in about 10 minutes, and the dual-sided PEI plate holds parts well
Disadvantages
- Loud fans — the printer is noticeably noisy at speed, the most common complaint in reviews
- No extruder tension adjustment — the spring-loaded idler gear can't be tuned, so soft TPU feeds poorly; only medium-soft elastomers work well
- No multi-color printing — the Q1 Pro has no multi-spool add-on, so it's single-filament only
- Steeper learning curve — the enclosure feels a bit cheap, the UI translation is rough in places, and QIDI Studio trails OrcaSlicer, so it's harder to learn than a Bambu Lab P1S
The QIDI Q1 Pro suits anyone who needs an enclosed, actively heated chamber for functional parts in ABS, ASA, nylon, and composites at a budget price. It's a workhorse for single-color engineering prints rather than colorful display models.
Bottom line: the Q1 Pro brings an active heated chamber and a 350 °C hotend usually reserved for pricier machines. Its strength is printing demanding materials; its weak spots are the noise and the lack of multi-color printing.