Anycubic Kobra 2 Max

The Anycubic Kobra 2 Max is a large-format open-frame FDM printer built for big models. It suits enthusiasts and small workshops that need a large build area without moving up to the professional price bracket. Its headline feature is a 420×420×500 mm build volume at print speeds up to 500 mm/s.

The build area is 420×420×500 mm (about 88 liters), with a recommended speed of 300 mm/s and a maximum of 500 mm/s at up to 10,000 mm/s² acceleration. The direct-drive dual-gear toolhead reaches 260 °C, and the magnetic PEI spring-steel bed goes up to 90 °C, covering PLA, ABS, PETG and TPU. The X/Y axes use dual metal spindles with belt tensioners, while the Z axis has two motors and a dual-leadscrew drive to keep the tall carriage stable. The 49-point LeviQ 2.0 auto leveling with smart Z-offset simplifies the first run.

Pros

• Large 420×420×500 mm build area — reviewers note it as one of the biggest in the budget class, letting you print large parts in one piece
• High speed up to 500 mm/s (300 mm/s recommended) on Klipper firmware noticeably cuts print time on big models
• 49-point LeviQ 2.0 auto leveling with smart Z-offset and simple control via the 4.3-inch touchscreen — beginner-friendly
• Direct-drive dual-gear extruder with strong part cooling feeds material reliably and handles flexible TPU well
• Despite its size, it can be assembled by one person and stays affordable for its format

Cons

• Wi-Fi only works with the Anycubic app and slicer — there is no LAN printing
• A proprietary high-flow toolhead instead of a standard one — third-party nozzles don't fit, so upgrade options are limited
• Open frame and a 90 °C bed: the chassis isn't meant for ABS or nylon, and large ABS parts tend to warp
• No manual bed-tramming knobs — everything depends on the sensor, and the size makes moving the assembled printer awkward

The Kobra 2 Max fits anyone who needs to print large objects in PLA and PETG: cosplay props, big functional parts, prototypes and decor. It's a choice for an enthusiast or small workshop willing to accept an open frame and the Anycubic ecosystem in exchange for a big build area at a low price per format.

Bottom line: an affordable large-format printer with a big build area and good speed; the trade-offs are the open frame, proprietary toolhead and reliance on the Anycubic app.

Reviews

• Tom's Hardware — Anycubic Kobra 2 Max Review: A Diamond in the Rough
• MakeUseOf — Anycubic Kobra 2 Max Review: Incredibly Fast, Large-Format Printing