Anycubic Kobra 2
Where to Buy
Specifications
Build Volume
Speed
Temperature
Layer Height
Construction
Physical
Information
Description
The Anycubic Kobra 2 is a budget FDM printer in the classic bedslinger layout, released in 2023 as a speed-focused update to the popular Kobra line. It is now discontinued but remains a favorite among beginners thanks to its low price, direct-drive extruder and out-of-the-box auto leveling.
The build volume is 220×220×250 mm, with print speeds up to 300 mm/s and acceleration up to 3000 mm/s² (200 mm/s recommended). The dual-geared direct-drive extruder with a 60 W heat block reaches 260 °C, and the magnetic spring-steel bed goes up to 110 °C, covering PLA, PETG, TPU and ABS. A 7000 rpm part-cooling fan speeds up layer cooling, and a dual Z-axis lead screw improves frame stability at high speed. Control is via a 4.3-inch color touchscreen, with file transfer over microSD card and USB.
Pros
- Good print quality out of the box at standard speeds — reviewers note clean results already at a 0.2 mm layer height
- The dual-geared direct-drive extruder handles flexible TPU and PETG confidently, which is rare in the budget class
- Inductive LeviQ 2.0 auto-leveling sensor with automatic Z-offset — accurate setup without manual fiddling
- Filament run-out sensor and power-loss recovery
- Magnetic flexible spring-steel build plate — prints pop off with a simple bend of the sheet
- Very accessible price and easy modular assembly in about 10 minutes
Cons
- Proprietary high-flow nozzle instead of the standard E3D Volcano format — hard to fit third-party nozzles
- Closed firmware with no Klipper-like tuning or fine control from the screen
- Open frame with no camera or Wi-Fi: ABS is finicky without an enclosure, and transfer is microSD and USB only
- Some questionable interface choices and general user-experience rough edges
The Kobra 2 fits anyone looking for an affordable first printer for home use: printing toys, figurines, household parts and prototypes in PLA, PETG and TPU without lengthy setup. A solid entry point into 3D printing when price matters and you don't need an enclosed chamber or network control.
Bottom line: a balanced budget bedslinger for its time — fast printing and a reliable direct-drive extruder in exchange for closed firmware and a proprietary nozzle. It is now discontinued, replaced by the Kobra 3 line.