Anycubic 4Max Pro 2.0

The Anycubic 4Max Pro 2.0 is an entry-level enclosed FDM printer with a one-piece body and touchscreen control. It suits beginners and anyone who wants stable printing in materials like ABS and TPU inside an enclosed chamber, ready to run out of the box.

The build volume is 270×210×190 mm, with print speeds of 20–150 mm/s (around 50 mm/s recommended) and a minimum layer height of 0.05 mm. The enclosed chamber retains heat and reduces draft, the nozzle reaches 260 °C and the perforated Ultrabase heated bed goes up to 100 °C, covering PLA, ABS, TPU, HIPS and PETG. TMC2208 drivers keep it quiet (under 50 dB), and the dual-gear feed mechanism handles flexible filament reliably.

Pros

• The enclosed body stabilizes chamber temperature — better results with ABS and other high-temp materials, plus protection from dust and hot parts
• Quiet operation on TMC2208 drivers (under 50 dB) and a charcoal filter on the exhaust to control odor
• The perforated Ultrabase heated bed gives good adhesion while printing and easy part removal once cooled
• Large, convenient leveling knobs make manual bed leveling much easier
• Assembled out of the box, with a filament runout sensor and power-loss recovery

Cons

• Heavy steel body (around 18.8 kg) — an aluminum profile would give the same rigidity at lower weight
• The enclosed design is hard to modify or upgrade after the fact
• Modest print speed by current standards and manual bed leveling without auto-leveling

The 4Max Pro 2.0 fits beginners and home users who want a ready-to-run enclosed printer for clean printing of functional parts and models, including ABS and TPU, without a noisy open frame.

Bottom line: a simple, reliable entry-level enclosed printer — quiet and stable printing in exchange for modest speed and limited upgrade options.

Reviews

• All3DP — Anycubic 4Max Pro 2.0: Specs, Price, Release & Reviews