SUNLU Standard Plus Resin
405nm Resin for LCD/MSLA
Standard Resin
Standard Resin vs ABS-like resin?Where to Buy
Price may vary by seller
SUNLU official store on AliExpressSelect a printer to check
Material passport
Cure wavelength 405 nm · wash: isopropyl alcohol · post-curing required
Specifications
Print parameters
Physical properties
Description
SUNLU Standard Plus Resin is a 405nm standard resin for desktop LCD/MSLA and DLP printers. The refined formula delivers higher print precision and a bit more toughness than basic resins, while keeping odor low. It suits miniatures, busts, prototypes, and decorative models where fine detail matters.
Print Settings
- Cure wavelength: 405nm
- Normal exposure: 1.5–3s on monochrome LCD, 4–15s on RGB screens
- Bottom exposure: 20–60s (mono), 30–80s (RGB)
- Bottom layers: 5
- Density: 1.1 g/cm³, 1000g bottle
- Storage: away from sunlight, at 15–35 °C
Exposure values are given as ranges — dial in the exact numbers for your machine with a calibration test. The resin works with most 405nm LCD/MSLA and DLP printers: Elegoo, Anycubic, Creality, and similar.
Frequently asked questions
On a monochrome LCD start with 1.5–3s per normal layer and 20–60s for bottom layers; on an RGB screen use 4–15s and 30–80s. Fine-tune with a calibration test for your printer.
Compatible printers
Matched by print temperatures and printer requirements