SUNLU 14K Standard Resin
405nm Photopolymer, 1kg
Standard Resin
Standard Resin vs ABS-like resin?Where to Buy
Price may vary by seller
SUNLU official store on AliExpressSelect a printer to check
Material passport
Cure wavelength 405 nm · wash: isopropyl alcohol · post-curing required
Specifications
Print parameters
Physical properties
Description
SUNLU 14K Standard Resin is a 405nm standard photopolymer for LCD, MSLA and DLP printers. Its 14K-grade formulation captures sharp edges and fine surface detail, which is why the line is a favorite for miniatures, figurines and display models. Low volumetric shrinkage keeps prints dimensionally stable with minimal warping or cracking, while the optimized viscosity flows fast between layers for cleaner surfaces and a higher success rate.
Print Settings
- Cure wavelength: 405nm
- Normal exposure (mono LCD): 2-3.5s
- Bottom exposure (mono LCD): 30-80s
- Bottom layers: 3-5
- Lifting distance: 6-10mm, lift/return speed: 120-180mm/min
- Density: ~1.1 g/cm³, 1kg bottle, low odor
The line works with virtually any 405nm resin printer — from Anycubic Photon and Elegoo Mars/Saturn to Creality HALOT. Dial in exact exposure with a calibration test for your specific screen: mono LCDs need short exposures, while RGB LCDs need noticeably longer times.
Frequently asked questions
Virtually any 405nm resin printer — LCD, MSLA and DLP: Anycubic Photon, Elegoo Mars and Saturn, Creality HALOT and more.
Compatible printers
Matched by print temperatures and printer requirements