SUNLU ABS-Like Resin
Tough 405nm Resin for LCD/MSLA
ABS-Like Resin
ABS-Like Resin vs standard resin?Where to Buy
Price may vary by seller
SUNLU official store on AliExpressSelect a printer to check
Material passport
Cure wavelength 405 nm · wash: isopropyl alcohol · post-curing required, 5 min
Specifications
Print parameters
Physical properties
Description
SUNLU ABS-Like Resin is a tough 405nm engineering resin built to behave like ABS. Unlike standard formulas it isn't brittle, so prints hold up to impact and abrasion. That makes the line a solid pick for miniatures, small functional parts, and prototypes. It cures with low shrinkage, leaves a smooth surface, and keeps odor light for a more comfortable session.
Print Settings
- Cure wavelength: 405nm
- Normal exposure: roughly 2–3 s (varies by printer and color)
- Bottom exposure: roughly 30–40 s
- Compatibility: 4K and 8K LCD, MSLA, DLP, and SLA printers
- Highlights: higher strength, low shrinkage, low odor
This line suits anyone who needs a working part, not just a display piece: gears, housings, brackets, prototypes, and durable miniatures. Dial in exact exposure with a calibration test for your printer — bump up the time for larger models, and post-cure finished prints evenly from all sides.
Frequently asked questions
It's noticeably tougher and far less brittle, so parts shrug off impact and abrasion. That makes it a better fit for functional parts and durable miniatures rather than display-only models.
Compatible printers
Matched by print temperatures and printer requirements