Anycubic Photon M3
Where to Buy
Specifications
Build Volume
Screen & light
Speed & layers
Resin tank
Physical
Information
Description
The Anycubic Photon M3 is an entry-level resin LCD printer (MSLA technology) that brings high detail to the budget segment. It's a great entry point into resin printing for beginners, and also works for experienced users as an affordable workhorse for miniatures and models.
At its core is a 7.6-inch monochrome LCD with 4K+ resolution (4096×2560 pixels) and 400:1 contrast, which keeps part edges sharp. The UV light source is the Anycubic LighTurbo parallel matrix at 405 nm, giving even exposure and fast print speeds up to 50 mm/h. The build volume is 164×102×180 mm, the laser-engraved aluminum build plate improves adhesion, leveling is manual 4-point, control is via a 2.8-inch touchscreen, and files transfer over USB.
Pros
- Very affordable — one of the cheapest resin printers at launch
- High detail and clean edges thanks to the 4K+ screen and 400:1 contrast
- Decent build volume of 164×102×180 mm for its class
- Laser-engraved build plate noticeably improves adhesion and print success rate
- Simple and quiet to run — great for a first look at resin printing
Cons
- No network features: files only via USB stick, no remote control or monitoring
- No built-in air filtration or tight enclosure seal — room ventilation needed
- The stock Photon Workshop slicer runs slower than ChiTuBox and Lychee
- Manual 4-point leveling and a small control screen
The Photon M3 suits anyone taking their first steps in resin printing: miniatures, figurines, jewelry master models and small high-detail parts. It's a reliable, inexpensive platform without extra frills.
Bottom line: a solid budget MSLA printer with good part quality — a great way into resin in exchange for no networking and a slow stock slicer.
Reviews
Compatible Materials
Filament and resin types that work with Anycubic Photon M3