ELEGOO PETG-CF
Carbon Fiber Reinforced PETG Filament
PETG-CF
PETG-CF vs PLA-CF?Where to Buy
Price may vary by seller
ELEGOO official store on AliExpressSelect a printer to check
Material passport
- Enclosure
- No
- Hardened nozzle
- Required
- All-metal hotend
- Required
- Drying before printing
- Required (65 °C · 8 h)
Specifications
Print parameters
Physical properties
Description
ELEGOO PETG-CF is PETG reinforced with chopped carbon fiber. The fill boosts stiffness and abrasion resistance, cuts down warping, and leaves a clean matte finish. It's made for strong functional parts — brackets, mounts, enclosures, and load-bearing pieces where plain PLA falls short.
Print Settings
- Nozzle temperature: 240–270 °C
- Bed temperature: 70–85 °C
- Print speed: 30–60 mm/s (recommended), up to 100 mm/s
- Diameter: 1.75 mm, 1 kg spool
- Hardened nozzle and all-metal hotend required
- Dry the spool at 65 °C before printing
PETG-CF shines on printers with a hardened nozzle and all-metal hotend — Bambu Lab, Creality K-series, QIDI, and others. An enclosure isn't required, but it improves layer adhesion and reduces warping on large parts. A great pick for tool holders, brackets, electronics enclosures, and other parts that need strength and rigidity.
Frequently asked questions
Yes. Carbon fiber is abrasive and wears out brass nozzles quickly. Use a hardened steel nozzle 0.4 mm or larger plus an all-metal hotend to keep nozzle life and feed accuracy.