Creality HALOT-MAGE S 1
Creality HALOT-MAGE S 2
Creality HALOT-MAGE S 3
Creality HALOT-MAGE S 4
Creality HALOT-MAGE S 5
Creality HALOT-MAGE S 6
SLACreality

Creality HALOT-MAGE S

from $489
Build Volume
223×126×230 mm
Max Speed
150 mm/s

Specifications

Build Volume

X × Y × Z223×126×230 mm

Speed

Print Speed150 mm/s

Layer Height

Range0.05 - 0.2 mm

Physical

Weight10.5 kg
Power Consumption100 W

Information

Release Year2024

Description

The Creality HALOT-MAGE S is an enclosed MSLA resin printer with a 10.1-inch monochrome LCD at 14K resolution (13320×5120). Released in April 2024, it targets makers, modellers, and small workshops producing miniatures that demand extreme detail without stepping up to industrial equipment. The current price is $489 at Creality Store and around 41,999 RUB from the official Russian reseller.

The build volume is 223×126×230 mm, the XY pixel is 16.8×24.8 μm, and the layer height is configurable from 0.05 to 0.2 mm. The Integral Light Source 3.0 (405 nm) delivers over 90% exposure uniformity. Dynax+ mode pushes print speed up to 150 mm/h, and the three-layer FEP film reduces peel force by about 35%. Controls run through a 4.3-inch touchscreen, with USB, Wi-Fi, and Ethernet connectivity, all powered by the cloud-enabled HALOT-OS.

Advantages

  • 14K 10.1" LCD (13320×5120) with 16.8×24.8 μm XY pixel — outstanding detail for miniatures and jewellery models (TechRadar, latestintech)
  • Dynax+ mode up to 150 mm/h — a 15 cm tall model prints in roughly an hour with no quality trade-off (Creality Forum)
  • Integral Light Source 3.0 with 90%+ exposure uniformity — consistent curing across the full vat area
  • Built-in activated-carbon air purifier — 33% more efficient than previous HALOT models, reduces resin odour indoors
  • Dual linear rails on Z plus a closed-loop motor rated at 1,300 N·m — minimal vibration and stable layer geometry (TechRadar)
  • Laser-carved CNC aluminium build plate with 2.25× tension — reliable adhesion and predictable part release

Disadvantages

  • Smart Resin Pump auto-fill is not bundled — manual vat refills, add-on sold separately (TechRadar, latestintech)
  • Flip-top UV cover limits placement against a wall — needs clearance behind and above the printer (3DToday)
  • Fine details require tuning exposure and model tilt (30–60°) to avoid vertical stripes and stair-step artefacts (Creality Forum)
  • Resin workflow mandates washing and UV post-curing — consumables and vat maintenance add to total cost of ownership

The HALOT-MAGE S suits experienced hobbyists and small studios that prioritise resolution and resin print speed. It fits tabletop, wargaming, jewellery prototyping, and small technical parts workflows. Newcomers to resin should plan ventilation and a wash/cure station before buying.

Overall, the printer reads as a thoughtful HALOT-line upgrade: a 14K panel, an efficient air filter, and HALOT-OS together deliver a real step forward in detail and day-to-day comfort. The main limitations are manual resin refills and the routine maintenance any MSLA machine demands.

Reviews