Creality HALOT-MAGE S

The Creality Halot Mage S is a photopolymer printer with a 10.3-inch 8K screen (14160×6230 resolution, ~33-micron pixel size), built for miniatures, jewellery masters and precision functional parts. Owners come here when switching from FDM to photopolymer printing and dealing with model-to-plate adhesion, cloudy FEP after 50–80 prints, uneven exposure at the screen edges, and exposure-time tuning for different photopolymer blends.

The most common complaints are FEP cloudiness after 50–80 prints, weak first-layer adhesion, uneven exposure at the 8K screen edges, and sticky residue after IPA washing. Before swapping the film, check bed levelling and the exposure time for the current photopolymer — most "defects" are either bad plate prep or unbalanced exposure. If you just unboxed it, start with the first-setup and exposure calibration guides; after 100+ hours of prints, walk through the FEP replacement and screen cleaning checklist.

Related reads: photopolymer safety (VOC, nitrile gloves, ventilation) and the Halot Mage S card.