Anycubic Kobra 3 V2

The Anycubic Kobra 3 V2 is a bedslinger FDM printer, an updated take on the popular Kobra 3 focused on multi-color printing and more polished software. It suits budget-minded beginners: setup takes about 10 minutes, and it prints with good quality out of the box.

The build volume is 255×255×260 mm, with a recommended print speed of 300 mm/s and a maximum of 600 mm/s at up to 20,000 mm/s² acceleration. The direct-drive extruder reaches 300 °C and the PEI spring-steel heated bed goes up to 110 °C, covering PLA, PETG and TPU. 4- or 8-color printing is handled by the ACE Pro auto-feeding system, which also dries filament; a 720p camera enables timelapses and AI spaghetti detection.

Pros

• Quick ~10-minute setup and excellent out-of-the-box quality thanks to well-tuned profiles in Anycubic Slicer Next
• Up to 600 mm/s (300 mm/s recommended) at up to 20,000 mm/s² acceleration — a Benchy prints in about 11.5 minutes
• The biggest gains over the Kobra 3 are in software: LeviQ3.0 auto leveling, an upgraded hotend, a stiffer frame and a Y-axis widened by 60 mm
• 720p camera with built-in timelapse and AI spaghetti detection, plus a filament sensor and power-loss recovery
• 4- or 8-color printing via the ACE Pro system, which also works as a filament dryer

Cons

• The ACE Pro unit is the weak spot: reviewers report it frequently clogs, jams and tangles filament during multi-color prints
• The closed ecosystem ties you to the in-house slicer and limits access to firmware and logs
• TPU is not compatible with the ACE Pro — flexible filament only prints in single-color mode
• The open frame without a heated chamber limits work with ABS and ASA

The Kobra 3 V2 fits beginners and hobbyists who want a ready-to-run fast printer for home: functional parts, prototypes and models, plus multi-color objects with the ACE Pro. For commercial work and reliable multi-color, the ACE Pro may not be dependable enough.

Bottom line: one of the cheapest ways to try multi-color FDM with good single-color quality — in exchange for a closed ecosystem and a finicky ACE Pro unit.

Reviews

• Tom's Hardware — Anycubic Kobra 3 V2 Review