SUNLU High Clear Resin
Transparent 405nm Photopolymer 1kg
Clear Resin · Transparent
Where to Buy
Price may vary by seller
SUNLU official store on AliExpressSelect a printer to check
Material passport
Cure wavelength 405 nm · wash: isopropyl alcohol · post-curing required
Specifications
Print parameters
Physical properties
Description
SUNLU High Clear Resin is a transparent 405nm photopolymer for LCD/MSLA and DLP printers. The line is built for crystal-clear prints: it resists yellowing, stays highly transparent and holds its clarity indoors over a long time. Low shrinkage and good fluidity give a high print success rate, and finished parts don't crack after curing.
Print Settings
- Cure wavelength: 405nm
- Normal exposure: 2.5-3s (monochrome LCD)
- Bottom exposure: 30-60s, with 5 bottom layers
- Density: about 1.1 g/cm³, low odor
- Compatibility: 99% of LCD printers, plus DLP and SLA
It's a good fit for transparent enclosures, lenses, vases, figures and display models where material clarity matters. For best results, store the bottle in a cool, dry place at 15-35°C and use it within a year.
Frequently asked questions
On a monochrome LCD, start at 2.5-3s per normal layer and 30-60s for the bottom layers (5 bottom layers). On RGB LCDs, normal exposure runs 4-15s. Fine-tune with a test print on your machine — exposure directly affects model clarity.
Compatible printers
Matched by print temperatures and printer requirements