Anycubic Tough Resin — 405nm Impact-Resistant Resin
Tough Resin · Standard
Colors
Where to Buy
Specifications
Description
Anycubic Tough Resin 2.0 is a 405nm ABS-like resin built for functional parts, not just display figurines. Its key difference from standard resin is much higher impact strength: finished models don't chip or crack when dropped or put under moderate load — they flex slightly instead. That makes it a good fit for gears, brackets, housings and snap-fit joints. It works with most desktop LCD/DLP printers and performs best on LCD machines.
Print Settings
- Cure wavelength: 405nm
- Normal exposure: roughly 2–3s (screen dependent)
- Bottom exposure: 25–35s
- Density: ~1.1 g/cm³, high impact strength and toughness
- Cleans with isopropyl alcohol (IPA); shake the bottle well before printing
The line is built for durable functional models: tools, mechanical assemblies, gears, clips, housing prototypes and snap-fits. It comes in five colors — gray, white, black, clear and cool gray. It's the right pick when you care about a reliable, impact-resistant part rather than a purely decorative print.
FAQ
Cured standard resin is hard but brittle, so parts chip on impact. Anycubic Tough Resin cures into a tougher, springier material that absorbs shocks and flexes slightly instead of cracking. That's why it suits functional parts rather than static figurines only.
Similar materials
Anycubic Tough Resin Ultra — Impact-Resistant 405nm Resin
Tough Resin · Standard
SUNLU High Toughness Resin — 405nm Impact-Resistant Resin
Tough Resin · Standard