Anycubic BJD Wear-Resistant Resin — Tough UV Resin Specs & Colors

Name: Anycubic BJD Wear-Resistant Resin — Tough UV Resin for Ball-Jointed Dolls
Brand: Anycubic

Specifications

Cure wavelength405 nm

Density1.1 g/cm³

Description

Anycubic BJD Wear-Resistant Resin is a tough, abrasion-resistant 405nm UV resin built for printing ball-jointed dolls (BJD): heads, faces and movable joints. The line's key strength is wear resistance — joint parts don't rub down or loosen over repeated assembly and disassembly. The material is anti-yellowing and leaves a smooth finish, so doll parts fit tightly with no play and take paint well.

Print Settings

Cure wavelength: 405nm
Normal exposure: roughly 2–3s (screen dependent)
Bottom exposure: 25–35s
Density: ~1.1 g/cm³, tough and wear-resistant
Cleans with isopropyl alcohol (IPA), mandatory UV post-curing

Print in a ventilated area and wear nitrile gloves — liquid resin needs careful handling. Post-curing under UV is mandatory after printing, otherwise the model stays tacky and won't reach full strength.

The line is tuned for ball-jointed dolls and anything you assemble and take apart often: BJD heads and faces, movable joints, figures and models with rubbing parts. The available shades — Mia White, Mia Pink and Storm Gray — suit painting and doll skin tones. The resin works with most desktop LCD/DLP/SLA printers running 405nm UV light.

FAQ

What is Anycubic BJD Wear-Resistant Resin for?

It's a tough, abrasion-resistant resin for printing ball-jointed dolls (BJD): heads, faces and movable joints. It resists wear, so joints don't loosen with frequent assembly and disassembly, and it doesn't yellow over time.

Which printers is it compatible with?

Do I need to post-cure after printing?

Does this resin smell strongly?