FilamenteSUN
eSUN PETG Matte — Matte, Strong PETG Filament
PETG · Matte
Colors
Select printer
Where to Buy
AliExpress
$14,62
Реклама · erid: 2SDnjcYci5QSpecifications
Nozzle temperature230–250 °C
Bed temperature70–80 °C
Drying before printingYes
Density1.27 g/cm³
Description
eSUN PETG Matte is a strong PETG with a matte, velvety surface. The matte finish hides layer lines and kills glare, while the material keeps all of PETG's strengths: toughness, flexibility and resistance to moisture and the outdoors.
Print Settings
- Nozzle temperature: 230–250 °C
- Bed temperature: 70–80 °C
- Cooling fan: around 50%
- Diameter: 1.75 mm, 1 kg spool
PETG is hygroscopic and prone to stringing. Dry it at 65 °C for about 6 hours and don't crank the fan — heavy cooling weakens layer adhesion. The matte surface forgives small print flaws.
Great for functional parts, enclosures and decor that need a strong yet clean, glare-free matte look. Prints with no enclosure, but needs a heated bed.
FAQ
It has a velvety, glare-free matte surface that hides layer lines and small print flaws better. Strength and water resistance match regular PETG.