Anycubic PETG Translucent

Name: Anycubic PETG Translucent
Brand: Anycubic

Specifications

Nozzle temperature230–250 °C

Bed temperature70–85 °C

Print speed50–100 mm/s

Density1.27 g/cm³

Description

Anycubic PETG Translucent is a line of see-through PETG filament for FDM printing. Backlit, the prints look semi-transparent or nearly clear; in daylight they show a clean, vivid tint — great for lampshades, vases, enclosures, and decor. PETG is also tougher and more impact-resistant than PLA, shrugs off moisture and household chemicals, and sticks reliably to the bed. A tight ±0.02 mm diameter tolerance and even winding keep the feed smooth, with no clogs or bubbles. The line offers 9 translucent colors, including a fully clear option.

Print Settings

Nozzle temperature: 230–250 °C
Bed temperature: 70–85 °C
Print speed: 50 mm/s (recommended), up to 100 mm/s
Diameter: 1.75 mm, ±0.02 mm tolerance
Heated bed required; no enclosure or hardened nozzle needed

PETG absorbs moisture from the air: dry damp filament at 60–65 °C before printing, or you'll get stringing and bubbles. Bump retraction up a little and lower part cooling to cut webbing and improve layer adhesion.

Translucent PETG is a great fit for decorative vases, lamps, clear housings, and functional parts that need strength and moisture resistance. The 1.75 mm filament works with almost any FDM printer that has a heated bed: Anycubic Kobra, Creality Ender 3, Bambu Lab, and more.