SUNLU PLA+ — Tougher PLA Filament with Neat Winding

SUNLU PLA+ is a reinforced take on regular PLA: it prints just as easily but comes out noticeably stronger and more flexible. SUNLU rates impact strength up to 8 kJ/m², which is 2–3x higher than most PLA and PLA+ on the market, so parts shrug off drops and knocks. The spool is wound perfectly, layer by layer, with no knots or tangles, so the filament feeds reliably even at high speeds.

Print Settings

• Nozzle temperature: 195–220 °C (195–205 °C at 50–100 mm/s, 205–220 °C at 100–300 mm/s)
• Bed temperature: 50–60 °C
• Recommended print speed: 50–100 mm/s, up to 300 mm/s on high-speed printers
• Diameter: 1.75 mm, tolerance ±0.02 mm
• Density: 1.24 g/cm³, 1 kg spool
• Drying if needed: 50 °C

This line is a great everyday workhorse: functional parts, enclosures, toys, decor and vases. A wide palette — over 30 colors, including transparents and a wood tone — plus compatibility with almost any 1.75 mm printer make SUNLU PLA+ a convenient all-rounder for both beginners and batch production.