SUNLU PLA Matte — Matte Filament 1.75mm

SUNLU PLA Matte is a standard PLA with a matte surface that hides layer lines and kills glare, so prints look clean straight off the bed — no sanding or painting needed. It runs as easily as regular PLA but gives a soft, almost stone-like finish that's great for vases, figurines and decor. The filament is neatly machine-wound with no knots or tangles, which means fewer breaks and less chance of a clogged nozzle.

Print Settings

• Nozzle temperature: 205–215 °C at 50–100 mm/s; 215–245 °C at 100–230 mm/s
• Bed temperature: 45–60 °C, a heated bed is required
• Print speed: up to 230 mm/s — fine for high-speed printers
• 1.75 mm diameter, ±0.02 mm tolerance, about 330 m on a 1 kg spool
• Odorless, biodegradable (corn-starch based), vacuum-sealed packaging

The line is compatible with nearly all FDM printers that have a heated bed, and even with a 3D pen. It's a great pick for decor, vase-mode prints, desktop figurines and prototypes where you want a matte look with zero post-processing. No hardened nozzle or enclosure required — this is plain, non-abrasive PLA.