SUNLU PLA Marble

SUNLU PLA Marble is a high-speed PLA filament with a natural stone look. Mineral particles are blended into the plastic, so finished parts look and feel like real marble: a matte, speckled surface without the usual plastic shine. The line is built for architectural models, sculptures, vases and decor, printing at up to 600mm/s with no stringing and no warping.

Print Settings

• Nozzle temperature: 190–260°C (190–210°C for 50–150mm/s, 210–230°C for 150–300mm/s, 230–260°C for 300–600mm/s)
• Bed temperature: heating optional; no heat when using glue, 50–60°C without glue
• Print speed: 300mm/s recommended, up to 600mm/s on thin walls
• Diameter: 1.75mm with ±0.03mm tolerance
• Highlights: matte stone-like texture, low shrinkage, zero bubbles

It runs on most high-speed printers with direct drive or bowden setups, including Bambu Lab, Creality K-series, Anycubic Kobra and others. Low shrinkage lets you print large architectural models without warping, and the matte finish hides layer lines on artistic pieces.