FilamenteSUN
eSUN PLA-LW — Lightweight Foaming PLA Filament
PLA · Standard
Colors
Select printer
Where to Buy
AliExpress
$31,89
Реклама · erid: 2SDnjcUAkENSpecifications
Nozzle temperature230–260 °C
Bed temperature45–60 °C
Density0.8 g/cm³
Description
eSUN PLA-LW is a foaming PLA for lightweight parts. Heated above ~230 °C the material expands and its density drops almost in half. By tuning temperature and flow you can print parts up to 40% lighter than regular PLA — a trick RC plane builders love.
Print Settings
- Nozzle temperature: 230–260 °C (hotter = more foaming)
- Bed temperature: 45–60 °C
- Flow: reduce by 30–50% to compensate for foaming
- Cooling fan: 100%
- Diameter: 1.75 mm, 1 kg spool
Foaming depends on temperature: calibrate the material with a temperature tower first and dial in flow. Without lowering flow the part over-extrudes — the material expands and there's 'more' of it than the slicer expected.
Ideal for RC planes, wings, lightweight shells and drones where every gram counts. Prints on open-frame machines, no enclosure needed.
FAQ
When heated the material foams and expands. If you don't cut flow by 30–50% the part over-extrudes. Find the exact value with a temperature tower on your own printer.
Similar materials
Filament
eSUN PLA Matte — Matte PLA Filament
PLA · Matte
Nozzle190–230 °C
150°300°
+2
AliExpress$12,57Реклама · erid: 2SDnjeu1EXC
Filament
eSUN PLA Rock — Stone-Textured PLA Filament
PLA · Marble
Nozzle210–230 °C
150°300°
AliExpress$18,69Реклама · erid: 2SDnjcPinPL
Filament
eSUN PLA+ — Enhanced PLA Filament
PLA · Standard
Nozzle210–230 °C
150°300°
+3
AliExpress$13,06Реклама · erid: 2SDnjeidKYn