FilamenteSUN
eSUN PA — Nylon Filament
Nylon (PA) · Standard
Colors
Select printer
Where to Buy
AliExpress
$25,84
Реклама · erid: 2SDnjcmxbcWSpecifications
Nozzle temperature240–270 °C
Bed temperature60–90 °C
EnclosureYes
Drying before printingYes
Density1.12 g/cm³
Description
eSUN PA is nylon (polyamide), one of the toughest and most wear-resistant consumer filaments. Parts are flexible, tough and shrug off abrasion, which is why nylon is used for gears, hinges, latches and load-bearing mechanical parts.
Print Settings
- Nozzle temperature: 240–270 °C
- Bed temperature: 60–90 °C
- Cooling fan: off or minimal
- Drying: 80 °C for about 8 hours before printing
- Enclosure: recommended
Nylon is extremely hygroscopic — it soaks up moisture from the air fast. Wet filament pops, bubbles and loses strength. Always dry it at 80 °C for about 8 hours and print straight from the dryer.
Great for functional, wear-resistant parts: gears, bushings, hinges, latches, tools. Best printed in an enclosure with a heated bed — nylon loves to warp.
FAQ
Nylon is extremely hygroscopic and quickly absorbs moisture from the air. Wet filament pops, bubbles and loses strength. Dry it at 80 °C for about 8 hours and print straight from the dryer.