Printer in this category
QIDI Q2C
QIDI Q2C
The QIDI Q2C is an enclosed entry-level CoreXY printer from 2025. It has a 270×270×256 mm build volume, a bimetal nozzle up to 370 °C, a 120 °C bed, load-cell auto leveling and Klipper-based firmware. At around $409, it's a stripped-down version of the QIDI Q2 without the heated chamber, AI camera and built-in air filter.
Q2C owners praise the consistent first layer and smooth surface finish, and most often ask about the missing heated chamber (ABS and nylon printing), the reliability of QIDI Box multicolor and slicer setup.
Related topics: Q2 vs Q2C comparison, the bigger QIDI Q2 and the QIDI Q2C printer page.
Multicolor Printing on the QIDI Q2C: QIDI Box Setup & Optimization
A complete guide to multicolor printing on the QIDI Q2C with the QIDI Box: setup, filament loading and NFC, flush and waste tuning in QIDI Studio, 65°C drying, and an honest look at the friction problems.
QIDI Q2C Review: Enclosed CoreXY & QIDI Box Combo
Honest QIDI Q2C review: enclosed CoreXY, 270x270x256 mm, 370 °C nozzle, load-cell leveling and open Klipper. First layer, noise, QIDI Box multicolor, cons and how it compares to the Q2 and P1S.