Creality Ender-3 V3
Where to Buy
Specifications
Build Volume
Speed
Temperature
Layer Height
Construction
Physical
Information
Description
The Creality Ender-3 V3 is a fast entry-level FDM printer with CoreXZ kinematics, released in 2024 as the final and most refined model in the classic Ender-3 line. Unlike the stripped-down SE and KE versions, the original V3 comes with a direct drive extruder, a tri-metal 300 °C hotend, and the same 4.3-inch color touchscreen used on the K1 series. It costs $239 on the official Creality store and around 27,600 ₽ on AliExpress.
The CoreXZ motion system is the printer's headline feature: two belts drive the X and Z axes simultaneously, which stiffens the frame and enables speeds up to 600 mm/s with 20,000 mm/s² acceleration. The build volume is 220×220×250 mm, layer height 0.1–0.35 mm, nozzle up to 300 °C, bed up to 110 °C, and a flexible PEI plate is included. Full auto leveling, a built-in G-sensor for input shaping, a filament sensor, Wi-Fi, and Creality Cloud support are all standard.
Advantages
- Real 600 mm/s speed at 20,000 mm/s² acceleration — CoreXZ delivers a stiffer, more responsive frame than a traditional Ender-3 bedslinger
- Direct drive with Unicorn tri-metal 300 °C nozzle — stable printing with PLA, PETG, ABS, TPU and PLA-CF / PETG-CF composites
- 4.3" color touchscreen borrowed from the K1 — clean menus, full auto leveling and calibration in a few taps
- Flexible PEI build plate with magnetic base heated to 110 °C — solid adhesion, parts pop off by flexing without a spatula
- Low $239 entry price for an open CoreXZ machine with a touchscreen — one of the best deals in the sub-$300 class per Tom's Hardware
- Klipper-based open firmware — easy to mod, with an active 3dtoday and Reddit community behind it
Disadvantages
- Open frame with no enclosed chamber — ABS and ASA warp at the corners and results are unstable in a cold room
- Per the Tom's Hardware review, several calibration cycles are required for flawless prints — not ideal for an absolute beginner
- Only 7.83 kg of mass at 600 mm/s — the printer visibly vibrates on the desk at top speeds, a rigid stand is recommended
- No remote monitoring camera, no multi-color printing, no active chamber heating — a single-color, single-material workflow only
The Ender-3 V3 suits enthusiasts and experienced makers who want a fast open direct drive printer at the lowest possible price rather than a sealed CoreXY system. It's a good pick for PLA, PETG and composite printing, classroom projects, Klipper upgrades, and firmware experimentation. Beginners who want great prints straight out of the box should consider the Ender-3 V3 SE or the Bambu Lab A1 instead.
Bottom line: the Ender-3 V3 is the mature final version of the legendary lineup and the first time Creality has brought CoreXZ into the budget segment. It's a machine for users who value speed, openness, and are willing to invest time in calibration for an excellent price-to-performance ratio.