SUNLU Red Wax Resin — Castable 1 kg for Jewelry Casting
Castable Resin · Matte
Colors
Where to Buy
Specifications
Description
SUNLU Red Wax Resin is a castable photopolymer with a clean red-wax tone, built for lost-wax investment casting in jewelry and dental work. The bright red master burns out cleanly inside a plaster mold with no ash residue, while its low curing shrinkage preserves the accuracy of fine details. The line stands out for its 8.5K-level detail and a matte surface that resists background light bleed.
Print Settings
- Cure wavelength: 405 nm
- Normal exposure: 1.5–3 s (monochrome LCD), 4–15 s (RGB LCD)
- Bottom exposure: 20–60 s (monochrome), 30–80 s (RGB)
- Bottom layers: 5
- Low viscosity and good fluidity — resin flows back quickly between model and film
- Low curing shrinkage — fine details stay crisp without warping or cracking
Works with LCD/MSLA and DLP resin printers. It's ideal for master models destined for jewelry casting, dental crowns, and high-detail miniatures where clean burnout and maximum detail matter most. Increase exposure time for larger models.
FAQ
It's a castable resin for lost-wax investment casting: you print a master of a piece of jewelry, a dental crown, or a precise part, invest it in plaster, and burn it out in a kiln. The wax-based resin burns out cleanly with no ash, leaving an accurate cavity for the metal.