ELEGOO PLA Glow — Glow-in-the-Dark PLA Filament

Name: ELEGOO PLA Glow — Glow-in-the-Dark PLA Filament
Brand: ELEGOO

Specifications

Nozzle temperature200–230 °C

Bed temperature50–60 °C

Print speed60–150 mm/s

Density1.24 g/cm³

Description

ELEGOO PLA Glow is a PLA filament loaded with a glow-in-the-dark pigment. Charge it under daylight or a lamp and it softly glows once the lights go out — in blue, green, yellow, orange, or pink from the lineup. It prints as easily as regular PLA: no warping, no enclosure, no fussy settings. A great pick for decor, toys, signs, and night lights.

Print Settings

Nozzle temperature: 200–230 °C
Bed temperature: 50–60 °C
Print speed: 50–60 mm/s (recommended), up to 150 mm/s
Diameter: 1.75 mm, 1 kg spool
No enclosure or heated bed required

The glow pigment (strontium aluminate) is mineral-based and mildly abrasive: over long print runs it gradually wears a brass nozzle. Fit a hardened nozzle if you print it often. And like any PLA, finished parts start softening around 55–60 °C — keep them out of direct sun.

For a bright glow, let the part "charge" under daylight or a UV lamp for 10–15 minutes, then it'll glow in the dark. PLA Glow works with any 1.75 mm FDM printer — Creality Ender 3, Anycubic Kobra, Bambu Lab, and more. The thicker the walls and denser the infill, the stronger and longer-lasting the glow.